Magnetic Particle Testing (NDT Level II) BANDUNG

Magnetic Particle Testing (NDT Level II) BANDUNG

TRAINING MATERIAL OUTLINE :

  1. Principles of Magnets and Magnetic Fields
    1. Theory of magnetic fields
    2. Theory of magnetism
    3. Terminology associated with magnetic particle testing
  2. Characteristics of Magnetic Fields
    1. Bar magnet
    2. Ring magnet
  3. Effect of Discontinuities of Materials
    1. Surface cracks
    2. Scratches
    3. Subsurface defects
  4. Magnetization by Means of Electric Current
    1. Circular field
    2. Longitudinal field
  5. Selecting the Proper Method of Magnetization
  6. Alloy, shape and condition of part
  7. Type of magnetizing current
  8. Direction of magnetic field
  9. Sequence of operations
  10. Value of flux density
  11. Inspection Materials
  12. Wet particles
  13. Dry particles
  14. Principles of Demagnetization
  15. Residual magnetism
  16. Reasons for requiring demagnetization
  17. Longitudinal and circular residual fields
  18. Basic principles of demagnetization
  19. Retentivity and coercive force
  20. Methods of demagnetization
  21. Magnetic Particle Testing Equipment
  22. Equipment selection considerations
  23. Manual inspection equipment
  24. Medium and heavy duty equipment
  25. Stationary equipment
  26. Mechanized inspection equipment
  27. Types of Discontinuities Detected by Magnetic Particle Testing
  28. Inclusions
  29. Blowholes
  30. Porosity
  31. Flakes
  32. Cracks
  33. Pipes
  34. Laminations
  35. Laps
  36. Forging bursts
  37. Voids
  38. Magnetic Particle Test Indications and Interpretations
  39. Indications of nonmetallic inclusions
  40. Indications of surface se
  41. Indications of cracks
  42. Indications of laminations
  43. Indications of laps
  44. Indications of bursts and flakes
  45. Indications of porosity
  46. Non-relevant indications
  47. Magnetization by Means of Electric Current
  48. Circular techniques
  49. Longitudinal technique
  50. Demagnetization Procedures
  51. Need for demagnetization of parts
  52. Current, frequency and field orientation
  53. Heat factors and precautions
  54. Need for collapsing flux fields
  55. Equipment
  56. Portable type
  57. Stationary type
  58. Automatic type
  59. Liquids and powders
  60. Black light type
  61. Light sensitive instruments
  62. Types of Discontinuities
  63. In castings
  64. In ingots
  65. In wrought sections and parts
  66. In welds

INSTRUCTOR :Y. Sinung Nugroho, Dipl.-Ing., MT.and Team

VENUE:Kagum Group Hotel Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

TRAINING TIME :

  • 19 Sep 2022-23 Sep 2022
  • 17 Oct 2022-21 Oct 2022
  • 21 Nov 2022-25 Nov 2022
  • 05 Dec 2022-09 Dec 2022

INVESTMENT PRICE/PERSON :

  • Rp. 11.500.000/person (full fare) or
  • Rp. 11.250.000/person (early bird, payment 1 week before training) or
  • Rp. 10.950.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS:

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate ASNT
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with Full AC facilities and multimedia
  9. Lunch and twice coffeebreak every day of training
  10. Qualified Instructor
  11. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

TRAINING INSTRUCTOR
Sinung Nugroho, Dipl.-Ing., MT.
is lecturer at aeronautical department politeknik negeri Bandung(before known as Poltek ITB). He was graduated from Science et Techniques Aeronautiques and Science et Techniques Aerospatiales University of Paris X, France. And graduated from ITB Master Degree on Aeronautical Engineering. He has followed some courses as informal education to improve his competencies, such as ASNT NDT Ultrasonic Testing as level III (Three), Magnetic Particle Testing as level III (Three), Liquid Penetrant Testing as level III (Three), ASNT NDT Ultrasonic Testing as level II (Two), ASNT NDT Magnetic Particle Testing as level II (Two), ASNT NDT Liquid Penetrant Testing as level II (Two), Aircraft General License A1 (Aircraft Structure), Aircraft General License A4 (Aircraft Turbine Engine), Human Resource Development training, Airbus 320 & N 250 Landing Gears Training,   Messier – Dowty, France, Composite Material Course, Aerodynamic Short Course and etc. Mr. Sinung Nugroho also has worked in some institution or companies so he has real work experiences and these are valuable for him when delivering training. He has taught training classes for industrial training in Indonesia.

Tinggalkan Balasan

Alamat email Anda tidak akan dipublikasikan. Ruas yang wajib ditandai *